"""

Mininet: A simple networking testbed for OpenFlow/SDN!

author: Bob Lantz ([email protected])

author: Brandon Heller ([email protected])

Mininet creates scalable OpenFlow test networks by using

process-based virtualization and network namespaces.

Simulated hosts are created as processes in separate network

namespaces. This allows a complete OpenFlow network to be simulated on

top of a single Linux kernel.

Each host has:

A virtual console (pipes to a shell)

A virtual interfaces (half of a veth pair)

A parent shell (and possibly some child processes) in a namespace

Hosts have a network interface which is configured via ifconfig/ip

link/etc.

This version supports both the kernel and user space datapaths

from the OpenFlow reference implementation (openflowswitch.org)

as well as OpenVSwitch (openvswitch.org.)

In kernel datapath mode, the controller and switches are simply

processes in the root namespace.

Kernel OpenFlow datapaths are instantiated using dpctl(8), and are

attached to the one side of a veth pair; the other side resides in the

host namespace. In this mode, switch processes can simply connect to the

controller via the loopback interface.

In user datapath mode, the controller and switches can be full-service

nodes that live in their own network namespaces and have management

interfaces and IP addresses on a control network (e.g. 192.168.123.1,

currently routed although it could be bridged.)

In addition to a management interface, user mode switches also have

several switch interfaces, halves of veth pairs whose other halves

reside in the host nodes that the switches are connected to.

Consistent, straightforward naming is important in order to easily

identify hosts, switches and controllers, both from the CLI and

from program code. Interfaces are named to make it easy to identify

which interfaces belong to which node.

The basic naming scheme is as follows:

Host nodes are named h1-hN

Switch nodes are named s1-sN

Controller nodes are named c0-cN

Interfaces are named {nodename}-eth0 .. {nodename}-ethN

Note: If the network topology is created using mininet.topo, then

node numbers are unique among hosts and switches (e.g. we have

h1..hN and SN..SN+M) and also correspond to their default IP addresses

of 10.x.y.z/8 where x.y.z is the base-256 representation of N for

hN. This mapping allows easy determination of a node's IP

address from its name, e.g. h1 -> 10.0.0.1, h257 -> 10.0.1.1.

Note also that 10.0.0.1 can often be written as 10.1 for short, e.g.

"ping 10.1" is equivalent to "ping 10.0.0.1".

Currently we wrap the entire network in a 'mininet' object, which

constructs a simulated network based on a network topology created

using a topology object (e.g. LinearTopo) from mininet.topo or

mininet.topolib, and a Controller which the switches will connect

to. Several configuration options are provided for functions such as

automatically setting MAC addresses, populating the ARP table, or

even running a set of terminals to allow direct interaction with nodes.

After the network is created, it can be started using start(), and a

variety of useful tasks maybe performed, including basic connectivity

and bandwidth tests and running the mininet CLI.

Once the network is up and running, test code can easily get access

to host and switch objects which can then be used for arbitrary

experiments, typically involving running a series of commands on the

hosts.

After all desired tests or activities have been completed, the stop()

method may be called to shut down the network.

"""

import os

import re

import select

import signal

import random

from time import sleep

from itertools import chain, groupby

from math import ceil

from mininet.cli import CLI

from mininet.log import info, error, debug, output, warn

from mininet.node import ( Node, Host, OVSKernelSwitch, DefaultController,

Controller )

from mininet.nodelib import NAT

from mininet.link import Link, Intf

from mininet.util import ( quietRun, fixLimits, numCores, ensureRoot,

macColonHex, ipStr, ipParse, netParse, ipAdd,

waitListening )

from mininet.term import cleanUpScreens, makeTerms

# Mininet version: should be consistent with README and LICENSE

VERSION = "2.2.1"

class Mininet( object ):

"Network emulation with hosts spawned in network namespaces."

def __init__( self, topo=None, switch=OVSKernelSwitch, host=Host,

controller=DefaultController, link=Link, intf=Intf,

build=True, xterms=False, cleanup=False, ipBase='10.0.0.0/8',

inNamespace=False,

autoSetMacs=False, autoStaticArp=False, autoPinCpus=False,

listenPort=None, waitConnected=False ):

"""Create Mininet object.

topo: Topo (topology) object or None

switch: default Switch class

host: default Host class/constructor

controller: default Controller class/constructor

link: default Link class/constructor

intf: default Intf class/constructor

ipBase: base IP address for hosts,

build: build now from topo?

xterms: if build now, spawn xterms?

cleanup: if build now, cleanup before creating?

inNamespace: spawn switches and controller in net namespaces?

autoSetMacs: set MAC addrs automatically like IP addresses?

autoStaticArp: set all-pairs static MAC addrs?

autoPinCpus: pin hosts to (real) cores (requires CPULimitedHost)?

listenPort: base listening port to open; will be incremented for

each additional switch in the net if inNamespace=False"""

self.topo = topo

self.switch = switch

self.host = host

self.controller = controller

self.link = link

self.intf = intf

self.ipBase = ipBase

self.ipBaseNum, self.prefixLen = netParse( self.ipBase )

self.nextIP = 1 # start for address allocation

self.inNamespace = inNamespace

self.xterms = xterms

self.cleanup = cleanup

self.autoSetMacs = autoSetMacs

self.autoStaticArp = autoStaticArp

self.autoPinCpus = autoPinCpus

self.numCores = numCores()

self.nextCore = 0 # next core for pinning hosts to CPUs

self.listenPort = listenPort

self.waitConn = waitConnected

self.hosts = []

self.switches = []

self.controllers = []

self.links = []

self.nameToNode = {} # name to Node (Host/Switch) objects

self.terms = [] # list of spawned xterm processes

Mininet.init() # Initialize Mininet if necessary

self.built = False

if topo and build:

self.build()

def waitConnected( self, timeout=None, delay=.5 ):

"""wait for each switch to connect to a controller,

up to 5 seconds

timeout: time to wait, or None to wait indefinitely

delay: seconds to sleep per iteration

returns: True if all switches are connected"""

info( '*** Waiting for switches to connect\n' )

time = 0

remaining = list( self.switches )

while True:

for switch in tuple( remaining ):

if switch.connected():

info( '%s ' % switch )

remaining.remove( switch )

if not remaining:

info( '\n' )

return True

if time > timeout and timeout is not None:

break

sleep( delay )

time += delay

warn( 'Timed out after %d seconds\n' % time )

for switch in remaining:

if not switch.connected():

warn( 'Warning: %s is not connected to a controller\n'

% switch.name )

else:

remaining.remove( switch )

return not remaining

def addHost( self, name, cls=None, **params ):

"""Add host.

name: name of host to add

cls: custom host class/constructor (optional)

params: parameters for host

returns: added host"""

# Default IP and MAC addresses

defaults = { 'ip': ipAdd( self.nextIP,

ipBaseNum=self.ipBaseNum,

prefixLen=self.prefixLen ) +

'/%s' % self.prefixLen }

if self.autoSetMacs:

defaults[ 'mac' ] = macColonHex( self.nextIP )

if self.autoPinCpus:

defaults[ 'cores' ] = self.nextCore

self.nextCore = ( self.nextCore + 1 ) % self.numCores

self.nextIP += 1

defaults.update( params )

if not cls:

cls = self.host

h = cls( name, **defaults )

self.hosts.append( h )

self.nameToNode[ name ] = h

return h

def addSwitch( self, name, cls=None, **params ):

"""Add switch.

name: name of switch to add

cls: custom switch class/constructor (optional)

returns: added switch

side effect: increments listenPort ivar ."""

defaults = { 'listenPort': self.listenPort,

'inNamespace': self.inNamespace }

defaults.update( params )

if not cls:

cls = self.switch

sw = cls( name, **defaults )

if not self.inNamespace and self.listenPort:

self.listenPort += 1

self.switches.append( sw )

self.nameToNode[ name ] = sw

return sw

def addController( self, name='c0', controller=None, **params ):

"""Add controller.

controller: Controller class"""

# Get controller class

if not controller:

controller = self.controller

# Construct new controller if one is not given

if isinstance( name, Controller ):

controller_new = name

# Pylint thinks controller is a str()

# pylint: disable=maybe-no-member

name = controller_new.name

# pylint: enable=maybe-no-member

else:

controller_new = controller( name, **params )

# Add new controller to net

if controller_new: # allow controller-less setups

self.controllers.append( controller_new )

self.nameToNode[ name ] = controller_new

return controller_new

def addNAT( self, name='nat0', connect=True, inNamespace=False,

**params):

"""Add a NAT to the Mininet network

name: name of NAT node

connect: switch to connect to | True (s1) | None

inNamespace: create in a network namespace

params: other NAT node params, notably:

ip: used as default gateway address"""

nat = self.addHost( name, cls=NAT, inNamespace=inNamespace,

subnet=self.ipBase, **params )

# find first switch and create link

if connect:

if not isinstance( connect, Node ):

# Use first switch if not specified

connect = self.switches[ 0 ]

# Connect the nat to the switch

self.addLink( nat, connect )

# Set the default route on hosts

natIP = nat.params[ 'ip' ].split('/')[ 0 ]

for host in self.hosts:

if host.inNamespace:

host.setDefaultRoute( 'via %s' % natIP )

return nat

# BL: We now have four ways to look up nodes

# This may (should?) be cleaned up in the future.

def getNodeByName( self, *args ):

"Return node(s) with given name(s)"

if len( args ) == 1:

return self.nameToNode[ args[ 0 ] ]

return [ self.nameToNode[ n ] for n in args ]

def get( self, *args ):

"Convenience alias for getNodeByName"

return self.getNodeByName( *args )

# Even more convenient syntax for node lookup and iteration

def __getitem__( self, key ):

"""net [ name ] operator: Return node(s) with given name(s)"""

return self.nameToNode[ key ]

def __iter__( self ):

"return iterator over node names"

for node in chain( self.hosts, self.switches, self.controllers ):

yield node.name

def __len__( self ):

"returns number of nodes in net"

return ( len( self.hosts ) + len( self.switches ) +

len( self.controllers ) )

def __contains__( self, item ):

"returns True if net contains named node"

return item in self.nameToNode

def keys( self ):

"return a list of all node names or net's keys"

return list( self )

def values( self ):

"return a list of all nodes or net's values"

return [ self[name] for name in self ]

def items( self ):

"return (key,value) tuple list for every node in net"

return zip( self.keys(), self.values() )

@staticmethod

def randMac():

"Return a random, non-multicast MAC address"

return macColonHex( random.randint(1, 2**48 - 1) & 0xfeffffffffff |

0x020000000000 )

def addLink( self, node1, node2, port1=None, port2=None,

cls=None, **params ):

""""Add a link from node1 to node2

node1: source node (or name)

node2: dest node (or name)

port1: source port (optional)

port2: dest port (optional)

cls: link class (optional)

params: additional link params (optional)

returns: link object"""

# Accept node objects or names

node1 = node1 if not isinstance( node1, basestring ) else self[ node1 ]

node2 = node2 if not isinstance( node2, basestring ) else self[ node2 ]

options = dict( params )

# Port is optional

if port1 is not None:

options.setdefault( 'port1', port1 )

if port2 is not None:

options.setdefault( 'port2', port2 )

if self.intf is not None:

options.setdefault( 'intf', self.intf )

# Set default MAC - this should probably be in Link

options.setdefault( 'addr1', self.randMac() )

options.setdefault( 'addr2', self.randMac() )

cls = self.link if cls is None else cls

link = cls( node1, node2, **options )

self.links.append( link )

return link

def configHosts( self ):

"Configure a set of hosts."

for host in self.hosts:

info( host.name + ' ' )

intf = host.defaultIntf()

if intf:

host.configDefault()

else:

# Don't configure nonexistent intf

host.configDefault( ip=None, mac=None )

# You're low priority, dude!

# BL: do we want to do this here or not?

# May not make sense if we have CPU lmiting...

# quietRun( 'renice +18 -p ' + repr( host.pid ) )

# This may not be the right place to do this, but

# it needs to be done somewhere.

info( '\n' )

def buildFromTopo( self, topo=None ):

"""Build mininet from a topology object

At the end of this function, everything should be connected

and up."""

# Possibly we should clean up here and/or validate

# the topo

if self.cleanup:

pass

info( '*** Creating network\n' )

if not self.controllers and self.controller:

# Add a default controller

info( '*** Adding controller\n' )

classes = self.controller

if not isinstance( classes, list ):

classes = [ classes ]

for i, cls in enumerate( classes ):

# Allow Controller objects because nobody understands partial()

if isinstance( cls, Controller ):

self.addController( cls )

else:

self.addController( 'c%d' % i, cls )

info( '*** Adding hosts:\n' )

for hostName in topo.hosts():

self.addHost( hostName, **topo.nodeInfo( hostName ) )

info( hostName + ' ' )

info( '\n*** Adding switches:\n' )

for switchName in topo.switches():

# A bit ugly: add batch parameter if appropriate

params = topo.nodeInfo( switchName)

cls = params.get( 'cls', self.switch )

if hasattr( cls, 'batchStartup' ):

params.setdefault( 'batch', True )

self.addSwitch( switchName, **params )

info( switchName + ' ' )

info( '\n*** Adding links:\n' )

for srcName, dstName, params in topo.links(

sort=True, withInfo=True ):

self.addLink( **params )

info( '(%s, %s) ' % ( srcName, dstName ) )

info( '\n' )

def configureControlNetwork( self ):

"Control net config hook: override in subclass"

raise Exception( 'configureControlNetwork: '

'should be overriden in subclass', self )

def build( self ):

"Build mininet."

if self.topo:

self.buildFromTopo( self.topo )

if self.inNamespace:

self.configureControlNetwork()

info( '*** Configuring hosts\n' )

self.configHosts()

if self.xterms:

self.startTerms()

if self.autoStaticArp:

self.staticArp()

self.built = True

def startTerms( self ):

"Start a terminal for each node."

if 'DISPLAY' not in os.environ:

error( "Error starting terms: Cannot connect to display\n" )

return

info( "*** Running terms on %s\n" % os.environ[ 'DISPLAY' ] )

cleanUpScreens()

self.terms += makeTerms( self.controllers, 'controller' )

self.terms += makeTerms( self.switches, 'switch' )

self.terms += makeTerms( self.hosts, 'host' )

def stopXterms( self ):

"Kill each xterm."

for term in self.terms:

os.kill( term.pid, signal.SIGKILL )

cleanUpScreens()

def staticArp( self ):

"Add all-pairs ARP entries to remove the need to handle broadcast."

for src in self.hosts:

for dst in self.hosts:

if src != dst:

src.setARP( ip=dst.IP(), mac=dst.MAC() )

def start( self ):

"Start controller and switches."

if not self.built:

self.build()

info( '*** Starting controller\n' )

for controller in self.controllers:

info( controller.name + ' ')

controller.start()

info( '\n' )

info( '*** Starting %s switches\n' % len( self.switches ) )

for switch in self.switches:

info( switch.name + ' ')

switch.start( self.controllers )

started = {}

for swclass, switches in groupby(

sorted( self.switches, key=type ), type ):

switches = tuple( switches )

if hasattr( swclass, 'batchStartup' ):

success = swclass.batchStartup( switches )

started.update( { s: s for s in success } )

info( '\n' )

if self.waitConn:

self.waitConnected()

def stop( self ):

"Stop the controller(s), switches and hosts"

info( '*** Stopping %i controllers\n' % len( self.controllers ) )

for controller in self.controllers:

info( controller.name + ' ' )

controller.stop()

info( '\n' )

if self.terms:

info( '*** Stopping %i terms\n' % len( self.terms ) )

self.stopXterms()

info( '*** Stopping %i links\n' % len( self.links ) )

for link in self.links:

info( '.' )

link.stop()

info( '\n' )

info( '*** Stopping %i switches\n' % len( self.switches ) )

stopped = {}

for swclass, switches in groupby(

sorted( self.switches, key=type ), type ):

switches = tuple( switches )

if hasattr( swclass, 'batchShutdown' ):

success = swclass.batchShutdown( switches )

stopped.update( { s: s for s in success } )

for switch in self.switches:

info( switch.name + ' ' )

if switch not in stopped:

switch.stop()

switch.terminate()

info( '\n' )

info( '*** Stopping %i hosts\n' % len( self.hosts ) )

for host in self.hosts:

info( host.name + ' ' )

host.terminate()

info( '\n*** Done\n' )

def run( self, test, *args, **kwargs ):

"Perform a complete start/test/stop cycle."

self.start()

info( '*** Running test\n' )

result = test( *args, **kwargs )

self.stop()

return result

def monitor( self, hosts=None, timeoutms=-1 ):

"""Monitor a set of hosts (or all hosts by default),

and return their output, a line at a time.

hosts: (optional) set of hosts to monitor

timeoutms: (optional) timeout value in ms

returns: iterator which returns host, line"""

if hosts is None:

hosts = self.hosts

poller = select.poll()

h1 = hosts[ 0 ] # so we can call class method fdToNode

for host in hosts:

poller.register( host.stdout )

while True:

ready = poller.poll( timeoutms )

for fd, event in ready:

host = h1.fdToNode( fd )

if event & select.POLLIN:

line = host.readline()

if line is not None:

yield host, line

# Return if non-blocking

if not ready and timeoutms >= 0:

yield None, None

# XXX These test methods should be moved out of this class.

# Probably we should create a tests.py for them

@staticmethod

def _parsePing( pingOutput ):

"Parse ping output and return packets sent, received."

# Check for downed link

if 'connect: Network is unreachable' in pingOutput:

return 1, 0

r = r'(\d+) packets transmitted, (\d+) received'

m = re.search( r, pingOutput )

if m is None:

error( '*** Error: could not parse ping output: %s\n' %

pingOutput )

return 1, 0

sent, received = int( m.group( 1 ) ), int( m.group( 2 ) )

return sent, received

def ping( self, hosts=None, timeout=None ):

"""Ping between all specified hosts.

hosts: list of hosts

timeout: time to wait for a response, as string

returns: ploss packet loss percentage"""

# should we check if running?

packets = 0

lost = 0

ploss = None

if not hosts:

hosts = self.hosts

output( '*** Ping: testing ping reachability\n' )

for node in hosts:

output( '%s -> ' % node.name )

for dest in hosts:

if node != dest:

opts = ''

if timeout:

opts = '-W %s' % timeout

if dest.intfs:

result = node.cmd( 'ping -c1 %s %s' %

(opts, dest.IP()) )

sent, received = self._parsePing( result )

else:

sent, received = 0, 0

packets += sent

if received > sent:

error( '*** Error: received too many packets' )

error( '%s' % result )

node.cmdPrint( 'route' )

exit( 1 )

lost += sent - received

output( ( '%s ' % dest.name ) if received else 'X ' )

output( '\n' )

if packets > 0:

ploss = 100.0 * lost / packets

received = packets - lost

output( "*** Results: %i%% dropped (%d/%d received)\n" %

( ploss, received, packets ) )

else:

ploss = 0

output( "*** Warning: No packets sent\n" )

return ploss

@staticmethod

def _parsePingFull( pingOutput ):

"Parse ping output and return all data."

errorTuple = (1, 0, 0, 0, 0, 0)

# Check for downed link

r = r'[uU]nreachable'

m = re.search( r, pingOutput )

if m is not None:

return errorTuple

r = r'(\d+) packets transmitted, (\d+) received'

m = re.search( r, pingOutput )

if m is None:

error( '*** Error: could not parse ping output: %s\n' %

pingOutput )

return errorTuple

sent, received = int( m.group( 1 ) ), int( m.group( 2 ) )

r = r'rtt min/avg/max/mdev = '

r += r'(\d+\.\d+)/(\d+\.\d+)/(\d+\.\d+)/(\d+\.\d+) ms'

m = re.search( r, pingOutput )

if m is None:

if received == 0:

return errorTuple

error( '*** Error: could not parse ping output: %s\n' %

pingOutput )

return errorTuple

rttmin = float( m.group( 1 ) )

rttavg = float( m.group( 2 ) )

rttmax = float( m.group( 3 ) )

rttdev = float( m.group( 4 ) )

return sent, received, rttmin, rttavg, rttmax, rttdev

def pingFull( self, hosts=None, timeout=None ):

"""Ping between all specified hosts and return all data.

hosts: list of hosts

timeout: time to wait for a response, as string

returns: all ping data; see function body."""

# should we check if running?

# Each value is a tuple: (src, dsd, [all ping outputs])

all_outputs = []

if not hosts:

hosts = self.hosts

output( '*** Ping: testing ping reachability\n' )

for node in hosts:

output( '%s -> ' % node.name )

for dest in hosts:

if node != dest:

opts = ''

if timeout:

opts = '-W %s' % timeout

result = node.cmd( 'ping -c1 %s %s' % (opts, dest.IP()) )

outputs = self._parsePingFull( result )

sent, received, rttmin, rttavg, rttmax, rttdev = outputs

all_outputs.append( (node, dest, outputs) )

output( ( '%s ' % dest.name ) if received else 'X ' )

output( '\n' )

output( "*** Results: \n" )

for outputs in all_outputs:

src, dest, ping_outputs = outputs

sent, received, rttmin, rttavg, rttmax, rttdev = ping_outputs

output( " %s->%s: %s/%s, " % (src, dest, sent, received ) )

output( "rtt min/avg/max/mdev %0.3f/%0.3f/%0.3f/%0.3f ms\n" %

(rttmin, rttavg, rttmax, rttdev) )

return all_outputs

def pingAll( self, timeout=None ):

"""Ping between all hosts.

returns: ploss packet loss percentage"""

return self.ping( timeout=timeout )

def pingPair( self ):

"""Ping between first two hosts, useful for testing.

returns: ploss packet loss percentage"""

hosts = [ self.hosts[ 0 ], self.hosts[ 1 ] ]

return self.ping( hosts=hosts )

def pingAllFull( self ):

"""Ping between all hosts.

returns: ploss packet loss percentage"""

return self.pingFull()

def pingPairFull( self ):

"""Ping between first two hosts, useful for testing.

returns: ploss packet loss percentage"""

hosts = [ self.hosts[ 0 ], self.hosts[ 1 ] ]

return self.pingFull( hosts=hosts )

@staticmethod

def _parseIperf( iperfOutput ):

"""Parse iperf output and return bandwidth.

iperfOutput: string

returns: result string"""

r = r'([\d\.]+ \w+/sec)'

m = re.findall( r, iperfOutput )

if m:

return m[-1]

else:

# was: raise Exception(...)

error( 'could not parse iperf output: ' + iperfOutput )

return ''

# XXX This should be cleaned up

def iperf( self, hosts=None, l4Type='TCP', udpBw='10M', fmt=None,

seconds=5, port=5001):

"""Run iperf between two hosts.

hosts: list of hosts; if None, uses first and last hosts

l4Type: string, one of [ TCP, UDP ]

udpBw: bandwidth target for UDP test

fmt: iperf format argument if any

seconds: iperf time to transmit

port: iperf port

returns: two-element array of [ server, client ] speeds

note: send() is buffered, so client rate can be much higher than

the actual transmission rate; on an unloaded system, server

rate should be much closer to the actual receive rate"""

hosts = hosts or [ self.hosts[ 0 ], self.hosts[ -1 ] ]

assert len( hosts ) == 2

client, server = hosts

output( '*** Iperf: testing', l4Type, 'bandwidth between',

client, 'and', server, '\n' )

server.cmd( 'killall -9 iperf' )

iperfArgs = 'iperf -p %d ' % port

bwArgs = ''

if l4Type == 'UDP':

iperfArgs += '-u '

bwArgs = '-b ' + udpBw + ' '

elif l4Type != 'TCP':

raise Exception( 'Unexpected l4 type: %s' % l4Type )

if fmt:

iperfArgs += '-f %s ' % fmt

server.sendCmd( iperfArgs + '-s' )

if l4Type == 'TCP':

if not waitListening( client, server.IP(), port ):

raise Exception( 'Could not connect to iperf on port %d'

% port )

cliout = client.cmd( iperfArgs + '-t %d -c ' % seconds +

server.IP() + ' ' + bwArgs )

debug( 'Client output: %s\n' % cliout )

servout = ''

# We want the last *b/sec from the iperf server output

# for TCP, there are two fo them because of waitListening

count = 2 if l4Type == 'TCP' else 1

while len( re.findall( '/sec', servout ) ) < count:

servout += server.monitor( timeoutms=5000 )

server.sendInt()

servout += server.waitOutput()

debug( 'Server output: %s\n' % servout )

result = [ self._parseIperf( servout ), self._parseIperf( cliout ) ]

if l4Type == 'UDP':

result.insert( 0, udpBw )

output( '*** Results: %s\n' % result )

return result

def runCpuLimitTest( self, cpu, duration=5 ):

"""run CPU limit test with 'while true' processes.

cpu: desired CPU fraction of each host

duration: test duration in seconds (integer)

returns a single list of measured CPU fractions as floats.

"""

cores = int( quietRun( 'nproc' ) )

pct = cpu * 100

info( '*** Testing CPU %.0f%% bandwidth limit\n' % pct )

hosts = self.hosts

cores = int( quietRun( 'nproc' ) )

# number of processes to run a while loop on per host

num_procs = int( ceil( cores * cpu ) )

pids = {}

for h in hosts:

pids[ h ] = []

for _core in range( num_procs ):

h.cmd( 'while true; do a=1; done &' )

pids[ h ].append( h.cmd( 'echo $!' ).strip() )

outputs = {}

time = {}

# get the initial cpu time for each host

for host in hosts:

outputs[ host ] = []

with open( '/sys/fs/cgroup/cpuacct/%s/cpuacct.usage' %

host, 'r' ) as f:

time[ host ] = float( f.read() )

for _ in range( duration ):

sleep( 1 )

for host in hosts:

with open( '/sys/fs/cgroup/cpuacct/%s/cpuacct.usage' %

host, 'r' ) as f:

readTime = float( f.read() )

outputs[ host ].append( ( ( readTime - time[ host ] )

/ 1000000000 ) / cores * 100 )

time[ host ] = readTime

for h, pids in pids.items():

for pid in pids:

h.cmd( 'kill -9 %s' % pid )

cpu_fractions = []

for _host, outputs in outputs.items():

for pct in outputs:

cpu_fractions.append( pct )

output( '*** Results: %s\n' % cpu_fractions )

return cpu_fractions

# BL: I think this can be rewritten now that we have

# a real link class.

def configLinkStatus( self, src, dst, status ):

"""Change status of src <-> dst links.

src: node name

dst: node name

status: string {up, down}"""

if src not in self.nameToNode:

error( 'src not in network: %s\n' % src )

elif dst not in self.nameToNode:

error( 'dst not in network: %s\n' % dst )

else:

if isinstance( src, basestring ):

src = self.nameToNode[ src ]

if isinstance( dst, basestring ):

dst = self.nameToNode[ dst ]

connections = src.connectionsTo( dst )

if len( connections ) == 0:

error( 'src and dst not connected: %s %s\n' % ( src, dst) )

for srcIntf, dstIntf in connections:

result = srcIntf.ifconfig( status )

if result:

error( 'link src status change failed: %s\n' % result )

result = dstIntf.ifconfig( status )

if result:

error( 'link dst status change failed: %s\n' % result )

def interact( self ):

"Start network and run our simple CLI."

self.start()

result = CLI( self )

self.stop()

return result

inited = False

@classmethod

def init( cls ):

"Initialize Mininet"

if cls.inited:

return

ensureRoot()

fixLimits()

cls.inited = True

class MininetWithControlNet( Mininet ):

"""Control network support:

Create an explicit control network. Currently this is only

used/usable with the user datapath.

Notes:

1. If the controller and switches are in the same (e.g. root)

namespace, they can just use the loopback connection.

2. If we can get unix domain sockets to work, we can use them

instead of an explicit control network.

3. Instead of routing, we could bridge or use 'in-band' control.

4. Even if we dispense with this in general, it could still be

useful for people who wish to simulate a separate control

network (since real networks may need one!)

5. Basically nobody ever used this code, so it has been moved

into its own class.

6. Ultimately we may wish to extend this to allow us to create a

control network which every node's control interface is

attached to."""

def configureControlNetwork( self ):

"Configure control network."

self.configureRoutedControlNetwork()

# We still need to figure out the right way to pass

# in the control network location.

def configureRoutedControlNetwork( self, ip='192.168.123.1',

prefixLen=16 ):

"""Configure a routed control network on controller and switches.

For use with the user datapath only right now."""

controller = self.controllers[ 0 ]

info( controller.name + ' <->' )

cip = ip

snum = ipParse( ip )

for switch in self.switches:

info( ' ' + switch.name )

link = self.link( switch, controller, port1=0 )

sintf, cintf = link.intf1, link.intf2

switch.controlIntf = sintf

snum += 1

while snum & 0xff in [ 0, 255 ]:

snum += 1

sip = ipStr( snum )

cintf.setIP( cip, prefixLen )

sintf.setIP( sip, prefixLen )

controller.setHostRoute( sip, cintf )

switch.setHostRoute( cip, sintf )

info( '\n' )

info( '*** Testing control network\n' )

while not cintf.isUp():

info( '*** Waiting for', cintf, 'to come up\n' )

sleep( 1 )

for switch in self.switches:

while not sintf.isUp():

info( '*** Waiting for', sintf, 'to come up\n' )

sleep( 1 )

if self.ping( hosts=[ switch, controller ] ) != 0:

error( '*** Error: control network test failed\n' )

exit( 1 )

info( '\n' )